These brackets may be used with U-Channel, Round or Square posts for either flat or extruded signs. A small hole is drilled on each side of the slot and tapped to accept a 5/16" standard or PRP38 vandal-resistant set screw. On the other side of the slot, a 9/16" clearance hole is drilled to allow bolt-through installation. When tightened, the bolt head counter sinks by passing through both the bracket and the sign blank.

Slot Length: 5 1/2"

Slot Depth: .875"

Slot Width: .160" (flat)

Slot Width: .280" (extruded)

#91UF-OL90 Cap Bracket
#91UX-OL90 Cap Bracket Available

#922F Cap Bracket
#922X Bracket available

#990F Cross Piece
#990X Cross available

 
America's trend toward larger signs has prompted Hall Signs, Inc. to develop better brackets to hold these signs. Our 12" Ultra-Supr-Lok Brackets are specifically designed for today's larger street name blades. Flat and extruded sign caps are avilable for U-Channel, Round or Square posts as well as croses.

Slot Length: 12"

Slot Depth: 14/16"

Slot Width: .200" (flat)

Slot Width: .326" (extruded)

#12U-90F Cap Bracket
#12U-90X Cap Bracket

#1238F Cap Bracket
#1238X Bracket available

#12-CRF Cross Piece
#12-CRX Cross available

Z238 Aluminum Interlocking Bracket Set

Fits standard MUTCD punched sign, or odd center-to-center hole locations. Set: 2 ea. large brackets 3.75" long w/5" mounting bar, 2 ea. small brackets 3.617" long, 4 ea. 5/16" x 5/8" bolt/nut sets and 2 ea. 5/16" x 1 3/4" bolt/nut sets.

BB832 Aluminum Interlocking Bracket Set

Fits 1 std MUTCD punched sign, or odd center-to-center hole locations. Set: 2 ea. large brackets 3.75" long w/5" mounting bar, 2 ea. small brackets 3.617" long, 2 cross bars, 2 ea. 5/16" x 5/8" bolt/nut sets & 2 ea. 5/16" x 1 3/4" bolt/nut sets.

The #4 Wing Bracket is ideal for mounting 911 Address signs! This bracket fits up to .125 gauge flat signs or extruded signs. The #4 bracket does not offer a bolt-though installation.

The #4 bracket can be mounted to a post with 3/4" strapping, or to a wall with bolts, lag screws, or spikes through the two holes pre-drilled in the bracket.

The #800 Metro Wing Bracket is our newest and largest wing mount bracket for today's larger street name blades and other signs.

The 24" #800 bracket can be mounted on any post with strapping, or on walls, concrete, and wood with bolts, lag screws or spikes. Set screws for sign mounting are included.

The #8 Metro Wing Bracket is totally new with a longer arm, and second only to our own #800.

Like our #800 bracket, the 16 1/2" #8 can be mounted on any post with strapping, or on walls, concrete, and wood with lag screws or spikes. Each bracket includes set screws for sign mounting.

1MBB - One Man Banner Bracket

One-man installation, single- or double-banner mount, with black fiberglass arms. Bracket piece mounts to post with bolts or strapping (not included). Plain anodized finish; black powder coating available upon request.

Kit includes: 2 - aluminum bracket assembly, 2 - 65" black fiberglass rod, 8 - 5/16" x 2" hex head bolts, 8 - 5/16" lock washers, 8 - 5/16" hex nuts.

Hall Signs' #BB7 Buckle Bracket is a complete buckle bracket assembly. The BB7 is adjustable to fit large diameter posts - starting with 4" outside diameter, up to 12" outside diameter.

Each Kit Includes:

• 2 precut 36" x 3/4" stainless steel straps

• 4 end buckles

• 2 P4-SS stainless steel brackets with bolt and washer*

• 2 - 5/16" x 1 3/4" hex bolts

• 2 - 5/16" hex nuts

*Order two additional P4-SS if you are putting a second sign on the opposite side of the same post.

Plus 4-SS
Stainless Steel Bracket with Bolt and Washer

Minus 4-SS
Stainless Steel Bracket with Bolt and Washer

2 3/8" O.D. Round Post Dome Style
Aluminum. Snaps on for easy application.

2 3/8" O.D. Round Post Flat Top Style
Aluminum. Includes: 3 ea. standard set screws.

1 3/4" Square Post Pyramid Style
Aluminum. Snaps on for easy application. Not pictured.

2" Square Post Pyramid Style
Aluminum. Snaps on for easy application. Not pictured.