06SS Wing Seals
Seals stainless steel 3/4" wing strapping. Binds and holds stainless steel strapping.

SS - 3/4" x .020" x 200'
Stainless Steel Strapping
Other gauges and widths available.

Snap Lock® Assembly
Radiator like clamp for sign mounting. Needs only a screwdriver to tighten.
9/16" x 40" strap length. Other sizes available.

TPA3516
5/16" x 2 1/2"
Zinc-Plated Steel Bolt

Truss headed, unslotted, carriage bolts with serrated under-carriage. Use with the NTPAFN fluted nut or the NBA breakaway nut.

NTPAFN
5/16" Aluminum
Fluted Nut

Requires a number T2 installation tool.

NBA
5/16" Aluminum
Breakaway Nut

Requires a standard wrench or visegrip for installation. When nut is tight, keep twisting firmly to break off hex head.

BHP76
5/16" x 3/4" Zinc-Plated Steel
Button Head Bolt

5/32" socket with center pin. Requires a number F100 or T100 installation tool.

VPA12
5/16" x 1/2" Aluminum Bolt

Requires a number T43 installation tool.

PRP38
5/16" x 3/8" Zinc-Plated Steel
Set Screw

Standard cup point 5/32" vandal-resistant socket set screw with center pin. Requires a number F100 or T100 installation tool.

We recommend the following products for the most basic sign installation when using a U-Channel post.

BH52
5/16" x 2" Zinc-Plated Steel
Hex Head Bolt

Additional sizes are available.
Please contact us for a complete catalog.

5/16" Zinc-Plated Steel
Hex Nuts

3/8" Nylon Washers

Install nylon washers in front, on face of sign to protect the reflective finish and keep the bolt head away from the sign face.

5/16" Corner Bolt - Small (above)
Attaches square posts together for a breakaway assembly.
Use with 1 1/2", 1 3/4" or 2" square posts.

5/16" Corner Bolt - Large
Attaches square posts together for a breakaway assembly.
Use with 2 1/4" or 2 1/2" square posts.

#34 Rivet
Aluminum Sleeve and Mandrel Rivet

1 13/16" long
Can be used to tack together the ends of street name blades for back to back installation on a square post.
Grip range: 1 7/8" to 2 1/8"
Component Length: 1.820"

3/8" Drive Rivets
Attaches sign to square post.

Zinc plated steel 3/4" round head.
.166" head thickness
7/16" shank and 1/4" drive pin.
Uses a standard hammer for installation.

T2 Tool
For use with aluminum NTPAFN tamper-resistant fluted nut.

T43 Tool
Works with the VPA12 aluminum vandal-resistant bolt.

The hardware and tools shown here are only a selection of the many products we have to offer.